Choosing a brick making machine is not simply a matter of selecting the model with the highest advertised output. A brick manufacturing business must first decide which brick sizes customers need, which raw materials are available, how the factory will handle fresh bricks, and what level of automation its team can operate and maintain. Those decisions determine whether the selected equipment can deliver useful, saleable production.
This practical guide explains brick manufacturing systems, the machine buying process, material preparation, mould selection, operating requirements and the questions to ask before ordering. It also connects these decisions to current machinery from Hardic Engineering (Mixwell India), including the FAM Supreme range. For readers planning an entire factory rather than just selecting a machine, the fly ash brick plant setup guide covers broader site and project planning.
What Is a Brick Making Machine?
A brick making machine forms prepared materials into repeatable brick shapes by using a mould and a suitable forming or compaction method. Different brick products require different materials and processes. Hydraulic and vibration-assisted systems are commonly discussed in relation to dry or low-slump concrete and fly ash brick production, while other brick technologies may use extrusion or different forming methods.
Because the term covers several manufacturing technologies, buyers should not assume that every machine advertised as a brick machine can produce every type of brick. A supplier should confirm the supported mix, mould dimensions, compaction arrangement and curing requirements for the specific product you intend to sell.
Decide Which Bricks You Want to Manufacture First
The first purchasing decision is the finished product, not the machine model. Establish target dimensions, expected strength, appearance and applications based on your market and any applicable standards. Customers may request fly ash bricks in multiple sizes, and capacity can change noticeably when the mould configuration changes.
Fly ash bricks
Fly ash brick production generally involves combining an approved raw-material mix, forming bricks in suitable moulds and curing them under an established procedure. The exact formulation and processing conditions depend on the selected technology and required product performance. Review Mixwell's fly ash bricks application page for examples of mould sizes and model-specific output.
Concrete bricks and paving units
Some multi-purpose machines can be configured for concrete bricks or compatible paver and block moulds. However, a machine's ability to produce a certain shape must be established against its pallet size, forming height, available pressure and vibration settings, and compatible tooling. If paving units are an important revenue stream, consult the separate paver block making machine guide, which focuses on paver shapes, production and selection.
Solid and hollow concrete blocks
Concrete blocks are a related manufacturing category but are not identical to standard bricks. Their larger geometry, mould arrangement and output calculations may differ substantially. The concrete block making machine guide explains those distinctions in greater depth.
How Does a Brick Making Machine Work?
In a hydraulic or vibration-based production arrangement, the machine forms prepared material through a controlled sequence. The following overview is general; exact stages and automation differ by model and installed accessories.
1. Raw material preparation
Inspect incoming fly ash, cementitious materials, aggregates or other approved ingredients for consistency and suitability. Verify grading, cleanliness and moisture. An inappropriate mix cannot be corrected merely by increasing press force. Maintain a documented material approval and batching process.
2. Mixing and material transfer
A compatible pan mixer or other mixer blends the measured constituents. Material is then delivered to the forming machine, by a manual or mechanised process depending on the line design. Consistent moisture and feed conditions help reduce variation between batches. Assess mixer throughput alongside the press capacity to avoid bottlenecks.
3. Mould filling and compaction
The feed system delivers a measured quantity into the selected mould. Hydraulic pressure and vibration, where fitted, help form and consolidate the product. Product-specific settings matter: a setting appropriate for one brick geometry may be unsuitable for another. Operators should work from manufacturer-approved parameters and validated trial batches.
4. Demoulding and pallet movement
After the forming sequence, the fresh products are released onto suitable pallets or handling supports. Green bricks may be fragile, so equipment alignment, pallet condition and transfer speed require attention. Depending on the configuration, feeding and movement may be automatic or involve operators.
5. Curing, inspection and dispatch
Freshly formed bricks must be cured using a process appropriate to the raw-material system. Check dimensions, visible defects and relevant performance characteristics before dispatch. Even a consistent automated production cycle cannot replace correct curing and testing.
For a deeper discussion of PLC-based sequences, hydraulics and automation, read Mixwell's automatic fly ash brick making machine working-process guide.
Automatic vs Semi-Automatic Brick Making Machines
Automation should be judged across the full production line rather than from a product label alone. One factory may automate moulding and pallet feeding while retaining manual mixing or stacking. Another may automate additional upstream or downstream operations. Request a clear equipment-scope statement.
| Buying consideration | Semi-automatic arrangement | Automatic arrangement |
|---|---|---|
| Operator involvement | May require manual initiation or handling between steps | More steps may be coordinated by the machine controls |
| Material and pallet flow | May depend more heavily on operator timing | Can include controlled feeding and pallet movement |
| Cycle repeatability | Depends on operator consistency and setup | Programmed sequences can support repeatability when inputs are stable |
| Technical maintenance | Mechanical, hydraulic and electrical servicing as fitted | Also requires attention to sensors, interlocks and controls |
| Selection priority | Match investment, labour availability and target production | Match plant integration, realistic throughput and technical support |
An automatic machine is not inherently the right choice for every business. It must be supported by reliable raw-material supply, adequate mixer capacity, trained operators, suitable curing space and an organised workflow. Automation can reduce repeated intervention, but it does not guarantee product strength or maximum production every shift.
Important Features to Compare Before Buying
- Mould and pallet compatibility: Check the exact brick dimensions, cavity count, pallet size and product height supported by the selected model.
- Hydraulic system: Review the press configuration, hydraulic components, servicing requirements and manufacturer-recommended operating settings.
- Vibration arrangement: Confirm whether vibration is included, how it works with the forming process and what settings apply to each product.
- Control system: Ask whether a PLC, touch-screen interface, sensors or monitoring functions are fitted to the particular model.
- Material handling: Assess feeder, conveyor, mixer, pallet supply and mould change procedures.
- After-sales support: Confirm training, availability of consumables and spare parts, maintenance guidance and response procedures.
- Safety provisions: Examine guards, emergency stops, interlocks and safe access for routine inspection and cleaning.
Insist on a written model-specific specification. A feature mentioned elsewhere in a manufacturer's catalogue may not be standard on the exact machine you order.
How to Estimate Brick Production Capacity Correctly
Machine capacity depends on the product geometry and mould, completed cycles and effective operating time. A practical calculation begins with the number of bricks per completed cycle, not a headline number detached from mould size.
Example for planning only: 10 bricks per cycle × 4 cycles per minute × 60 = 2,400 bricks per hour. This is an illustrative calculation, not a guaranteed Mixwell production result.
Next account for changeovers, material interruptions, pallet transfer, cleaning, planned maintenance and rejected products. Actual saleable production can be lower than the theoretical figure. For meaningful comparisons, ask every supplier to quote output for the same brick dimensions, mould format and shift assumptions.
Mixwell's fly ash bricks application page provides a side-by-side reference for several FAM model sizes. Those published figures vary with brick dimensions. They should be checked alongside the selected model's current specification and a suitable demonstration, not treated as promises of a fixed daily output.
Compare Mixwell's FAM Supreme Brick Machine Models
Hardic Engineering lists FAM Supreme models intended for automatic fly ash brick production and, with suitable configurations, other compatible concrete products. The following comparison is intentionally limited to verified machine identity and model pages rather than claiming identical accessories across the range.
| Current model | Published product focus | What buyers should verify |
|---|---|---|
| FAM 1800 Supreme | Fully automatic fly ash brick making with related brick/block configurations | Required output for the selected mould, plant utilities and included accessories |
| FAM 2160 Supreme | Automatic brick production with model-specific hydraulic, control and material handling details | Brick size, output table, pallet dimensions and automation scope |
| FAM 2520 Supreme | Multi-purpose automatic fly ash brick and block manufacturing configuration | Product-specific cavities, vibration settings, mould suitability and site requirements |
These models are not interchangeable merely because they share the Supreme series name. Carefully read the page-specific technical tables and ask the manufacturer which configuration matches your brick sizes, target output and site conditions. See the complete Mixwell product range for further current options, including other FAM series and supporting equipment.
Plan the Entire Factory, Not Just the Press
The production press is one part of a functional brick plant. Capacity is constrained by whichever process stage cannot keep up with the rest. A machine capable of fast moulding may operate below its potential if the mixer cannot supply material consistently or if there are insufficient pallets and curing space.
- Layout: Reserve safe space for incoming materials, mixing, machine operation, pallet movement, curing, finished stock and vehicle access.
- Utilities: Confirm electrical supply, water availability, drainage and other services requested by the machinery supplier.
- Material control: Document supplier specifications, stock handling, proportions, mixing sequence and moisture checks.
- Workforce: Assign trained personnel to batching, machine operation, inspection, curing and preventive maintenance.
- Quality records: Track dimensions, visible defects, test results, machine settings and batch traceability.
- Service access: Plan clearance for mould maintenance, inspections, parts replacement and safe isolation.
Detailed setup planning, including utility and project considerations, is covered in the fly ash brick plant guide.
Common Brick Production Problems and What to Check
Uneven edges or incomplete mould filling
Inspect material consistency, feed distribution, mould cleanliness and the forming procedure. Uneven cavity filling can create variation even when the press cycle is automated. Make adjustments using documented settings and test batches.
Cracks or damage during handling
Review the mix, green product strength, demoulding sequence and pallet movement. Rough transport can damage freshly formed products before they develop sufficient strength.
Unexpected reduction in hourly output
Record completed cycles, stops, raw-material interruptions and changeover time. Compare actual equipment availability with the theoretical production calculation rather than assuming the press alone is responsible.
Variation in finished brick performance
Check raw-material quality, batching, mixing, compaction, curing and testing procedures. Follow applicable technical standards and obtain advice from a qualified materials professional when needed.
Maintenance and Operator Safety Essentials
Preventive maintenance improves reliability and helps protect both people and equipment. Establish a manufacturer-approved schedule rather than relying only on breakdown repairs.
- Inspect mould wear, alignment and fasteners before they cause repeated defects.
- Check hydraulic connections, leaks and oil condition using the prescribed maintenance instructions.
- Clean feeders, mixer surfaces and material-transfer areas without entering hazardous zones during operation.
- Check vibration components and structural fixings according to the manufacturer schedule.
- Verify guards, emergency-stop functionality and relevant electrical or control-system safety features.
- Use proper isolation and lockout procedures before maintenance or clearing a jam.
- Keep service, fault, rejection and shift-production records so recurring issues are visible.
Machine operators should receive training for normal operation, emergency conditions and safe cleaning. Automatic movement makes machine guarding and procedural discipline more important, not less.
Brick Making Machine Buying Checklist for Indian Manufacturers
Before asking for a final quotation, prepare the following information. It allows suppliers to recommend a machine based on manufacturing requirements rather than a generic brochure description.
- Required finished brick types, dimensions and applicable quality requirements.
- Raw materials available locally, including expected quality and consistency.
- Realistic saleable output target per hour and per shift.
- Land and shed arrangement, curing and finished-product storage areas.
- Available electricity, water and material-handling resources.
- Preferred automatic operations and acceptable manual handling stages.
- Required moulds, pallets, mixer and conveyor scope.
- Installation responsibilities, operator training and after-sales support.
- Spare parts, preventive maintenance plan and demonstrated machine suitability.
If concrete masonry blocks will form a significant part of your output, the related block making machine selection guide can help you compare those requirements separately. For businesses evaluating fully automated concrete block lines, see the automatic concrete block machine guide.
Frequently Asked Questions About Brick Making Machines
Which brick making machine is best for a new business?
The appropriate machine depends on the brick type, mould dimensions, target output, factory utilities, labour availability and service support. Compare verified configurations instead of choosing only by advertised maximum capacity.
Can the same machine make fly ash bricks and concrete blocks?
Some multi-purpose machines support more than one product type with compatible moulds and validated settings. Confirm each intended product and its capacity for the exact model before purchasing.
Is an automatic brick making machine always more productive?
Automation can improve cycle coordination and repeatability, but complete plant output also depends on mixing, feeding, pallet handling, curing, downtime and product rejection.
How do I compare brick machine output between models?
Compare the same brick dimensions, number of cavities, completed cycles, shift duration and assumptions for operating efficiency. Ask for mould-specific production data and a practical demonstration.
Does a hydraulic brick machine guarantee high brick strength?
No. Strength depends on material selection, mix formulation, compaction, curing and quality testing. Pressing technology is only one part of that process.
What is the role of pallets in brick manufacturing?
Pallets support freshly formed products during release and handling in applicable machine configurations. Correct dimensions, rigidity, condition and availability affect continuous operation and product handling.
Do I need a PLC-controlled machine?
It depends on how much of the manufacturing sequence you want to automate. Ask which functions are PLC-controlled, whether the selected model includes the system and what operator training is supplied.
How can I reduce downtime in a brick making plant?
Maintain stable material supply, schedule preventive maintenance, train operators, inspect moulds and record stoppage causes. Evaluate the entire line rather than the press in isolation.
Conclusion: Choose the Right Machine for Your Actual Brick Production
A successful brick manufacturing operation begins with the finished product and a reliable production process. Evaluate mould compatibility, material preparation, hydraulic and vibration arrangements, actual line capacity, curing and after-sales support before choosing a model. Use verified machine specifications and a realistic shift plan rather than assuming every brick size gives the same output.
Planning a brick manufacturing project? Explore the Mixwell brick and block machinery range and contact Hardic Engineering with your required brick sizes, material information and target production capacity. The team can discuss suitable machine configurations and the equipment needed for your project.
